PH / EC / Temperature Meter

PH / EC and Temperature 3 in 1 Combi meter

The updated PH, EC and temperature meter from Aqua Master is equipped with improved software. The big advantage of this model (Combo Pen P150 Pro) is that the EC is calibrated analogously, so that the calibration fluid does not necessarily have to be 25 C. You calibrate without deviations.

EC buffer fluids are very temperature sensitive, but this does not apply to pH. The electrode is easy to replace if it is worn or broken. This model is supplied in a robust storage case including pH 4.01, pH 7.00 and EC 1413 buffer fluids, so that the meter can be calibrated at a later time.

The Combo Pen is very suitable for measuring the pH, EC, PPM, TDS, US and temperature of the nutrient water of your weed plants. The combi meter can of course also be used for water in swimming pools, jacuzzis and ponds.

The Combo Pen P150 Pro has easy-to-use buttons and you can easily switch between the parameters. The meter is calibrated and supplied with batteries.

How does the PH / EC meter work?

1. Remove the protective cap from the PH / EC meter.
2. Carefully clean the electrode with distilled water and dry it.
3. Press the On / Off button.
4. Insert the ph meter upright into the solution to the edge and stir gently and wait a few seconds until the correct value appears on the display.
5. Press the Temp / CAL key to switch between temperature and fahrenheit and press the PH / EC key to switch between pH and EC.
6. Make sure the meter is in EC mode to switch between EC, US, TDS and PPM. Then keep the PH / EC button pressed for more than 5 seconds to change the parameter.
7. After use, rinse the electrode with water and press the On / Off button to switch the meter off.

We recommend keeping the meter upright with KCI storage solution in the protective cap.

The 3 in 1 combi meter comes with:

• 1 x Combo Pen P150 Pro.
• 1 x Handy storage box.
• 1 x Buffer solution (pH 7.00 50 ml).
• 1 x Buffer solution (pH 4.01 50ml).
• 1 x solution (EC 1413 25ml).
• 1 x Screwdriver for calibration.
• 1 x Manual (NL - EN - DE).